基于词法特征的恶意域名快速检测算法

针对互联网中恶意域名攻击事件频发，现有域名检测方法实时性不强的问题，提出一种基于词法特征的恶意域名快速检测算法。该算法根据恶意域名的特点，首先将所有待测域名按照长度进行正则化处理后赋予权值；然后利用聚类算法将待测域名划分成多个小组，并利用改进的堆排序算法按照组内权值总和计算各域名小组优先级，根据优先级降序依次计算各域名小组中每一域名与黑名单上域名之间的编辑距离；最后依据编辑距离值快速判定恶意域名。算法运行结果表明，基于词法特征的恶意域名快速检测算法与单一使用域名语义和单一使用域名词法的恶意域名检测算法相比，准确率分别提高1.7%与2.5%，检测速率分别提高13.9%与6.8%，具有更高的准确率和实时性。     

数据驱动的机床等待过程节能方法研究

为了降低机床等待过程中的能耗，提出了一种实时数据驱动的机床等待时间预测与节能控制方法。首先，建立了射频识别驱动的生产进度评估方法，并以生产进度数据作为输入，构建了基于堆栈降噪自编码的机床等待时间预测模型；其次，依据预测的机床等待时间，提出了机床状态切换方法，以降低机床能耗；最后，通过一个电梯零部件制造车间的案例分析，表明该方法的预测误差仅为4.1%，同时将机床等待过程能耗降低了57%，实现了制造车间的节能减排。     

Effect of processing method on vitamin profile,antioxidant properties and total phenolic content of coconut (Cocos nucifera L.) sugar syrup

Coconut (Cocos nucifera L.) sugar is a more nutritious alternative sugar source as compared to sugar palm (Borassus flabellifer) and sugarcane (Saccharum officinarum L.). This work was aimed to investigate the browning index (BI), vitamin profile and antioxidant properties of coconut sap sugar syrups, which were produced by different processing methods: rotary evaporation (RE), microwave evaporation (ME) and open-heat evaporation (OHE). The results obtained showed that coconut sugar syrup produced by RE-60 contained high antioxidant activities [DPPH (36.71%) and ABTS (34.84%), TPC (299.87 mg per 100 g sample) and FRAP (3.74 mm )]. These values were slightly lower than those of ME and OHE. Coconut sugar syrup (RE-60) also contained higher amounts of vitamin C (1587.27 mg L⁻¹), vitamin B1 (97.44 mg L⁻¹) and vitamin B3 (19.84 mg L⁻¹) compared with those of ME and OHE coconut sugar syrups. RE-60 was the best method to produce coconut sugar syrup in a shorter time with lower browning index and higher vitamin contents.     

Emergency egress for the elderly in care home fire situations

Practitioners are continuing to develop egress modelling software for the design of the built environment. These models require data about human behaviour and factors for calibration, validation and verification. This study aims to address the specific data and knowledge gap: emergency egress of the elderly. Such data are difficult to collect given privacy and consent concerns, with strong relationships generally being required between residences and researchers. Through the observation of nine fire drills at six Canadian long-term care (LTC) and retirement homes, specific evacuation actions and behaviour were observed for 37 staff members and information about the evacuation of 56 residents was collected. These drills demonstrated that emergency egress in LTC and retirement homes is highly staff dependent with 72% of residents recorded requiring full assistance at all stages of movement in evacuation, and that the type of announced/unannounced drill and level of resident care will affect the type of data collected. The development of travel speed and pre-movement is discussed subject to limitation with qualitative behavioural insights of residents that were observed. This study provides valuable methodological discussion on how to conduct behavioural studies in similar highly restricted research environments. Specific attention is given to understanding the considerations that must be made when using fire drills as data sources, and the impact that these can have on using such data for modelling. This study may inform the initial setup and programming of evacuation models from an actions and behavioural perspectives of staff members and residents.     

求解带时间窗车辆路径问题的改进型烟花算法

针对带时间窗车辆路径问题,为寻求组合优化问题最优解,构建总运输成本最小数学模型。由于烟花算法搜索半径不能自适应调整,算法后期易陷入局部最优,故对爆炸算子进行改进,使最优烟花搜索半径自适应调整,增强后期局部搜索能力;同时利用分布式信息共享机制避免算法早熟并引入变异火花增强种群多样性。利用标准测试集进行验证后,结果表明该算法在求解带时间窗车辆路径问题时不仅具有可行性和有效性,并且收敛速度快、搜索质量高。     

国内建筑涂料市场影响因素与预测分析

中国是全球最大的建筑涂料市场，各涂料厂商在中国建筑涂料市场上进行激烈竞争，能够精准预测行业趋势对各涂料厂商精准决策和投资，提升企业经营质量具有重要意义。文章收集了近 12年建筑业总产值、房地产投资、城镇常住居民人口、 M2和 GDP等影响建筑涂料市场的数据，通过回归分析的方法得出：各影响因素与建筑涂料产量存在紧密且正相关的定量关系，并由此预测了国内建筑涂料市场在未来 3年将稳步发展。     

两相区配分时间对IQ&P钢组织与性能的影响

以含Cu低碳钢为研究对象,利用SEM、EPMA和拉伸试验研究了两相区配分时间对其组织演变、元素配分以及经IQ&P处理后力学性能的影响,并利用Dictra软件对元素配分行为进行了动力学计算。结果表明,IQ处理后试验钢中的块状马氏体形成于原铁素体区域;随两相区配分时间延长,粒状马氏体数量减少,板条状马氏体之间的间距减小。检测和计算结果的对比显示,C、Mn、Cu 3种元素的相对配分速率与计算结果一致,但实际配分速率低于各自的计算结果。随两相区配分时间延长,经IQ&P处理后试验钢的抗拉强度先增加后减小,而伸长率持续减小;在600 s时达到较好的强塑性匹配,强塑积为16 963.24 MPa·%。     

Reference databases,primer choice,and assay sensitivity for environmental metabarcoding: Lessons learnt from a re‐evaluation of an eDNA fish assessment in the Volga headwaters

Biodiversity monitoring via environmental DNA, particularly metabarcoding, is evolving into a powerful assessment tool for riverine systems. However, for metabarcoding to be fully integrated into standardized monitoring programmes, some current challenges concerning sampling design, laboratory workflow, and data analysis need to be overcome. Here, we review some of these major challenges and potential solutions. We further illustrate three potential pitfalls, namely the choice of suitable metabarcoding primers, the necessity of complete reference databases, and varying assay sensitivities, by a reappraisal of our‐own recently carried out metabarcoding study in the Volga headwaters. TaqMan qPCRs had detected catfish (Silurus glanis) and European eel (Anguilla anguilla), whereas metabarcoding had not, in the same samples. Furthermore, after extending the genetic reference database by 12 additional species and re‐analysing the metabarcoding data, we additionally detected the Siberian spiny loach (Cobitis sibirica) and Ukrainian brook lamprey (Eudontomyzon mariae) and reassigned the operational taxonomic units previously assigned to Misgurnus fossilis to Cobitis sibirica. In silico analysis of metabarcoding primer efficiencies revealed considerable variability among primer pairs and among target species, which could lead to strong primer bias and potential false‐negatives in metabarcoding studies if not properly compensated for. These results highlight some of the pitfalls of eDNA‐metabarcoding as a means of monitoring fish biodiversity in large rivers, which need to be considered in order to fully unleash the full potential of these approaches for freshwater biodiversity monitoring.     

Cutter mark cross method for improvement of contact stiffness by controlling distribution of real contact area

Contact surfaces do not make contact perfectly because such surfaces have a lot of asperities. The real contact area is much smaller than the nominal contact area, and the real contact areas has a non-uniform distribution because of the waviness in the contact surface. The contact stiffness is influenced not only by the deformation of the asperities, but also by the distribution of the real contact areas. In general, a contact surface with a uniform distribution of the real contact areas has greater contact stiffness. However, this requires a grinding finish and costs more than the cutting finish. In this study, a method for uniformly distributing the real contact areas easily, is proposed to improve the contact stiffness of a contact surface finished by cutting. The method is called the cutter mark cross (CMC) method. The allowable waviness in the CMC method is shown. In addition, the effect of the CMC method is investigated by experimentation. The results show that the real contact areas can be distributed uniformly using the CMC method. The horizontal and vertical contact stiffness can also be improved.